It turns out the guys in Turkey that repaired the stabilizers weren’t nearly as knowledgeable as we thought, and didn’t do as good of a job as we thought. They were supposed to Continue reading
Yesterday, we woke up to dark gray skies and heavy rain. The combination of the ugly day and the inability to open the doors and windows made for yet another depressing day. It was also really cold out, meaning we needed long pants, sweaters and jackets. Louis had asked us for a statement for his insurance, so Christi spent the majority of the day doing laundry and writing the blog post for the volcano/emergency rescue and gave the post to Louis as our official statement of events. That was one long story and took pretty much all day to write.
Eric spent the day cleaning the engine room and flushing it with fresh water. He cleaned out the manual bilge pump and the high water bilge pump. Both were clogged with pieces of a small cardboard box that had gotten wet and disintegrated into the bilge. We normally keep cardboard out of the engine room. This was a relatively small box of rubber gloves Eric uses for changing oil and fuel filters. It had just gone empty. So it was tucked between two oil buckets waiting to be thrown in the trash. Instead that small box clogged two bilge pumps and caused no end of trouble. The third bilge pump turned out to be clogged with sawdust. We have purposely flooded our bilge to clean out sawdust, but never quite got the water as high as it got this time. We view the saw dust removal as another silver lining. While we were terrified, it turned out the situation wasn’t dangerous once the portholes were shut. Now the bilge is more cleared out so hopefully the bilge pumps won’t get clogged should a genuine leak develop.
Eric also set up the emergency bilge pump in Continue reading
Yesterday Eric was up early to work on the generator. He added more coolant. He took apart the intake hose to see if maybe something was stuck (or maybe even growing) inside it. It was totally clear. Then he tested the flow of the water from the through hull. It seemed slow. Hmmm. Something was stuck on the intake under the boat. We did a quick check on that before, but did not find anything. Something to check again when we get to cleaner water.
The streets were again decorated with banners, different from the ones we saw last week, and also with flags. The fireworks started at 0800. By 1000 we could hear several marching bands playing in the street.
We were in no rush to leave, so we decided to make a stop by the maritime museum before heading out. Like most of the buildings in the area, the museum is made of limestone and each level has crazy high ceilings. The museum is fairly large, and it has a nice collection of the standard maritime museum stuff. There are all kinds of old navigation instruments, uniforms, weapons, anchors, fenders, amphoras, really early inverters, and other accoutrements for life at sea. In a room of more modern equipment, there were even some missiles. There were models of all kinds of boats throughout the display, and one entire room was turned into a full scale model of the engine room of a real Maltese dredging ship, the Anadrian. There is an exhibit on the history of the steamship, as well as an exhibit on the era when the British turned Malta into a major naval base. And, oddly enough, there was a traveling exhibit featuring clown art. It was kind of random to walk from the life-size replica of a work ship into a room full of clowns.
After we left the museum, we headed out on Kosmos. We really didn’t need to leave for Tunisia until sunset, but we wanted to stop by an anchorage called The Blue Lagoon off the island of Camino, between Gozo and Malta Islands. We were told it is just beautiful and we would love it. Apparently, everyone in the entire country of Malta who owns a boat decided to go there, too. It was a zoo. We were pretty uncomfortable with how tightly packed the boats were, so we anchored out in the fringes, only to have some other boats drop anchor disconcertingly close to us. We were also shocked at how fast some of the boats were zooming around in the anchorage, weaving in and out of the anchored boats and getting much too close to hulls and anchor chains.
Eric donned a mask and jumped in for a swim. He started checking under the boat and ah hah! He found a plastic bag stuck in the intake on the port side of the boat. It turns out we were mistaken about which through hull the generator was attached to when Christi did the quick check. Eric excitedly got out and turned on the generator. It was back to normal temperature and there was no white smoke. Yay! Generator mystery solved. Eric also cleaned the Continue reading
Eric was back at Customs at 0715, as told. He checked in with no problems. Then he walked to the tourist police, up a steep hill and four flights of stairs, to be told that the officers were all out checking in a cruise ship. They said to come back later. Grrr. Today is not starting out any better than yesterday!
After the unsuccessful trip to the tourist police, Eric went to the boat store next to the marina to ask about the gasket material, which comes as a board that you cut to the proper size and shape. They didn’t have it, but they could get it quickly. Great! He added a second supporting rope from the boom to the passarelle, which did the trick to make the passarelle stable. Here is a shot of our beautiful new passarelle. You can see what we mean about the angle being awkward against the sea wall.
It is a fairly long walk to the tourist police from the marina, so Eric decided to Continue reading
Today was a busy day! As you may recall, we have an obnoxious squeak on the port (left) stabilizer and a leak that has gone from slight to more serious on the starboard (right) side. The necessary parts arrived this morning, and by 1000 the repair guys were working away. They started on the starboard side. The leak was coming from Continue reading