We have been agonizing over a pasarelle. A passarelle is basically a walkway that connects your boat to the sea wall when you are Mediterranean moored. Mediterranean moor means that you back into a spot in between two boats and tie the back of your boat to a sea wall. The boat is not usually close enough to the back wall to easily get on and off the boat, which is where the passarelle comes in. Many people skip installing a passarelle and simply use a wooden board. We tried the wooden board in Greece, but it slid around and it felt unstable. In Greece and at DMarin, we would yank on the ropes to bring the boat close enough to the wall that we could jump to and from shore. Both the wooden plank and the jumping were a little scary.

So why would installing one be an agonizing decision? First of all, Continue reading →

Today we were up early and got right to work. Christi scraped barnacles off the metal on the underside of the boat for 7 hours. It was infinitely easier to scrape most of the metal out of the water than in. The exception was the stabilizer keel cooler, which is equally hellacious both in and out of the water. Christi found barnacles in every crack and crevice, including places that she hadn’t even realized existed. She was shocked to find that several of the barnacles stuck to the top of the main engine keel cooler were bigger than American half dollar coins. It is amazing that the keel coolers continue to work just fine despite the barnacles.

Eric’s first task of the day was to Continue reading →