Exploring Nelson’s Dockyard & Falmouth Harbor

Yesterday Christi slept in especially late, and when she did get up, she was moving slow. Between swimming all day and dancing all night, she had gotten more exercise than normal and she was feeling it.

We puttered around all morning, and at 1330, she finally got underwater to do the metal. On the port side, the metal had a small amount of growth, nothing major. The bottom has a fine, thin layer of grass starting to grow. She scraped the metal, then moved to the starboard side and almost had a heart attack. The metal on this side was Continue reading

Fueling up, Bottom Cleanings, Chores and Food in Las Palmas

We woke up pleased to see that the day was mostly sunny with scattered clouds. The wind wasn’t as strong and it was and noticeably warmer than yesterday. Good news! Here is sunrise in the marina.

pb290118-small.jpg

At 0800, we pulled out of our slip and headed to the fuel dock to top off. A big, custom passagemaker power boat and a small sailboat, both American flagged, had just beat us to the dock. The passagemaker was loading up with fuel for their crossing and would be there for a long time. Fortunately, they let us raft up next to them. The hose was long enough to reach our boat. We only took 1200 liters, but it took a long time because the pump wasn’t very fast. We put in every last drop we could fit in there. Fuel was 74 Euro cents a liter ($3.91 USD a gallon). We always put biocide into the fuel, and this time we also added Stanadyne fuel conditioner, as well. We brought the Stanadyne from San Diego and have been dragging it all around the world with us, only using it for the three big ocean crossings and after our Egypt fueling where the fuel was going to be sitting for a long time. Here is a shot of the marina from the fuel dock.

pb280097-small.jpg

After we were done fueling, we headed over to the anchorage so Christi could clean the bottom. Despite the fact that the water in the marina is crystal clear with lots of schools of small fish swimming around, she refuses to get in the water in the marina. Since the water here isn’t nearly as warm as in the tropics, she covered every inch of her body for warmth, and even put on two hoods.

img_0771-small.jpg

The waterline has a layer of green algae growth on the strip of bottom paint that sticks out above the waterline when we are not weighed down by fuel/water. In the front it came off reasonably easy, but in back it is thicker growth and stuck on like glue. She focused on the Continue reading

Chores, Food, and More Food in Las Palmas

Yesterday and today were chore days. Yesterday’s big task was installing the new 5.7 water pump. It was a quick and easy install. All worked great, and Eric and Colin were proud of themselves. Until an hour later when the pump died. After a quick troubleshoot, it was clear that the fuse connector was loose. With a quick squeeze of the pliers to make the connection tighter, the problem was instantly solved. They also cleaned the AC water maker. Today’s big project for the men was to change the oil on the main and repack the lazarette. Of course, the lazarette had to be unpacked to access the water pump. Eric also removed another smelly pad from the bildge, so hopefully our smell is gone for good now.

Christi has been doing spring cleaning. Knowing nothing will be cleaned for three weeks, she wants to get as everything as clean as possible before we go.

The other important thing is we went through all the emergency and safety gear on board. We made sure everyone knew exactly what we have and where it is located. This was a good review for Eric and Christi. Since we never use those things, it is easy to forget about them. We also reviewed emergency plans.

We are ashamed to admit that Continue reading

Stabilizers, Fuel, and Chores in Gibraltar

Eric is starting to stress out about the Atlantic crossing. We were originally going to be here for only three days, leaving us lots of time in the Canaries to get things ready for the big crossing. Now, thanks to the stabilizer delay, it looks like we will only have a few days in the Canaries to get things ready. The “to do” list is long, and sadly, most of it is last minute stuff.

So, needless to say, yesterday and today have been chore days. The biggest and most important news is that ABT repair technician came today at about noon for the stabilizers. He was done by 1400. We now have a new hydraulic cylinder actuator. This time we Continue reading

More Chores in Palma

This morning the wind had pretty much died and the marina was, for the most part, calm. Praise the Lord! We slept great and woke up full of energy, determined to get a lot done to make up for all the wasted days last week when we were too lethargic from the rocking to do much. It was ominously gray and cloudy all day, but it never really rained.

Eric set out to find a gasket and shaft packing tool. He went to two chandleries. The second chandlery sent him to a machine shop to have a gasket made. Eric arrived at the shop holding his home made gasket and the leftover gasket material we had gotten in Greece. The machine shop guys dropped what they were doing to make a gasket for him right then and there. And they only charged him $12 USD! Eric gave them Continue reading